Contact Us Help Spares

TT Built-In Thermostatic 2 Control Shower Valve Body

A3969(NU) TT built-in thermostatic shower valve, body only. TMV3

TT Built-in thermostatic shower valve body, contains ceramic disc cartridge giving drip free use and is impervious to lime deposits. Recommended for systems where water pressures are between 0.1 and 5.0 bar. Requires Face plates & handle pack see catalogue section for details of Active, Ascari, Attitude & Jasper Morrison options.


  • Domestic and commercial use
  • TMV3
  • Plaster guard for easy fix installation
  • Twin water sealing system
  • Choice of Face plate & handle packs
  • Solid brass valve body
  • Reversible inlets with integral check valves

  • Unfinished
    (NU)
Material: Chrome Plated Brass
Weight: 2.40Kg
Flow rate: 13.5 Litres per minute @ 3 bar pressure


View data sheet  

Shower Valve

A3969 TT built-in thermostatic shower valve, body only. TMV3

Shower Valve Face Plate

A4613 Attitude faceplate and handles for use with A3969NU Trevi TT shower valve

Shower Valve Face Plate

A3642 TT Silver shower faceplate & handles pack

Shower Valve Face Plate

A4105 TT Active shower faceplate and handles pack

Shower Valve Face Plate

E6410 TT Jasper Morrison shower faceplate & handles pack

Sectors & Solutions

Special notes

Flow rate 6.5 litres per minute at 0.1 bar. Suitable for all vented low pressure systems (0.1 Bar minimum) modulating combination boilers and unvented high pressure systems (5.0 Bar maximum). Maximum pressure differential for functions to specification is 5:1 ratio. Inlets and outlets screwed 3/4in BSP female. Can be installed vertically or horizontally (except Kurve). Build in depth between 51.5 and 73.5mm from finished wall surface. Automatic safety shutdown if hot or cold water supply fails. Temperature control mechanism has safety temperature lock facility variable between 40 Deg.C and 48 Deg.C. If situation requires operation with a closed fist, then install with short lever Oposta faceplate and handles.