Contact Us Help Spares

Markwik 21 Demountable Pillar Mixer, Single Sequential Lever, Detachable Spout

A6242(AA) Markwik 21 integral thermostat, demountable pillar mixer, single sequential lever, detachable spout and Armitage Bioguard outlet fitted

Mainly used as a healthcare mixer. Demountable pillar mixer tap with removable spout and fitted with Armitage Shanks Bioguard outlet. Integral thermostat, single sequential lever operation and single flow horizontal nozzle. Sequential operation ensures both hot and cold water is drawn on each use, long lever gives precise control. Insulated technology keeps the ‘hot’ side of the mixer at a safe surface temperature. Includes thermal disinfection features, spout is removable for autoclave sterilisation, body demounts from legs or panel for submergible disinfection and Bioguard outlet also helps protect against bacteria. Optional adaptor for interchangable filter.


  • General healthcare
  • 200mm centre tapholes
  • Built in isolation valves
  • Thermal disinfection feature
  • Front access D-08 auditing&servicing
  • Remove and sterilise spout
  • Bioguard against bacteria
  • Demount, submerge and disinfect

  • Chrome
    (AA)
Material: Chrome Plated Brass
Weight: 4.88Kg
Flow rate: 7.5 Litres per minute @ 3 bar pressure

Standards: Conforms to HBN 00.10, HBN 00.09 and HTM 04-01 Addendum 2013.

View data sheet  

Brassware

A6242 Markwik 21 integral thermostat, demountable pillar mixer, single sequential lever, detachable spout and Armitage Bioguard outlet fitted

Sectors & Solutions

Variants

Special notes

This product is fitted with an Armitage Bioguard outlet which reduces the opportunity for bio film attachment and is lined with anti-microbial copper. Single lever operates on/off and temperature control. Suitable for high and low pressure systems. Access for servicing to simplify D-08 auditing and servicing. Unique built-in thermal disinfection feature using Sterilisation kit S8239NU bridging hose which is reusable. Horizontal outlet eliminates water retention associated with ‘Swan Neck’ designs. Integral thermostat eliminates stagnant warm water trapped between an inline TMV* and the fittings under used cold feed. *Any existing TMV would need to be removed when replacing with our integral thermostat mixer. Especially suitable for use in conjunction with medium and large basins or sinks with tapholes at 200mm between centres. Purging kit A4556AA after installation allows debris to be flushed without affecting the thermostat and aids system disinfection. Flow rate regulated to maximum of 10 Litres per minute.

Variants