Contact Us Help Spares

Sentry 21 Handrinse Washbasin

S3301(01) Sentry 21 washbasin, solid surface material, wave-on controls

The Sentry 21 basin is designed and tested to be vandal proof and avoid ligature points wherever possible. The basin and fittings are suitable for use in high security areas including prisoner and mental health applications. It is intended for ducted installations where all pipework and the control box are concealed behind a wall or panel.The product has been successfully tested at HMP test centre at Lindholme. The techniques employed to construct this product are used very successfully in the field of ballistic armour. High resistance to cyclical stresses and dual stage failure mode. This provides excellent impact resistance and will not be subject to catastrophic failure. High chemical resistance and resistance to ultraviolet effects.


  • Suitable for Safe Cell and mental health use
  • Impact and chemical resistant
  • Supplied with Sensor, water spouts and Sentry21 control box
  • Alternative Tactile control version
  • Lock-out system

  • White
    (01)
Weight: 12.92Kg
Width: 450mm
Depth: 300mm
Flow rate: 5 Litres per minute @ 3 bar pressure

Standards: Tested at HMP test centre at Lindholme.\n Home Office/MOJ/MOD/BMA Accreditation.\n Fire Rated BS4746 - Class 0.

View data sheet  

Washbasin

S3301 Sentry 21 washbasin, solid surface material, wave-on controls

Ancillary

S3319 Sentry 21 Washbasin stainless steel 100mm wall pipe, for 50mm wall thickness

Variants

Special notes

Unfortunately we cannot guarantee protection against those intent on self-harm, but we consider that the design and materials used reduce the risks significantly. Must be installed using specialist Anti-Pick mastic sealant. Suitable for 150mm wall thickness. For smaller wall thickness please specify the optional 100mm pipe. For larger wall thicknesses please contact our technical department on the number below.

Variants