Installers Contact Us Help Spares Outlet Store

Thermostatic Mixing Valve

A5900(AA) TMV Thermostatic mixing valve 15mm

Thermostatic mixing valvea are to supply premixed water to a set temperature to basin, bidet, bath or shower. 15mm mixers are designed to be positioned under basin or bidet immediately below the hot water inlet. Mixers should be commissioned at installation to the application designated temperature. 22mm mixers designed to be positioned under basin, bidet or bath immediately below the hot water inlet. Mixers should be commissioned at installation to the application designated temperature. *For high pressure bath filler


  • Automatic shut off if cold supply fails
  • Precise temperature control
  • Hygenic

  • Chrome
    (AA)
Material: Chrome Plated Metal
Weight: 0.60Kg

Standards: Meets the requirements of the NHS Model Engineering Specification - D08 for Type 3 Valves. BS EN 1111 & 1287

View data sheet  

Thermostatic Valve

A5900(AA) TMV Thermostatic mixing valve 15mm

Variants

Special notes

Operating pressures from 0.2 to 5.0 bar, 10 bar static pressure. Recommended supply temperatures, Hot 52-65 degrees Centigrade, Cold 5-20 degrees Centigrade. For best results both supplies should be at equal pressures. The valve is eminently suitable for multi point usage. The number of outlets that can be served by one valve is dependent on the flow performance of the terminal fitting selected. At 1bar 15mm valve could provide the following outlet options: 3 washbasins or 3 showers. (Assumes 8 LPM flow rate per outlet). At 1bar 22mm valve could provide the following outlet options: 2 baths or 4 washbasins or 4 showers. (Assumes 15LPM for bath outlet).

Variants

This assembly is part of: