Thermostatic mixing valves are to supply pre-mixed water to a set temperature to basin, bidet, bath or shower. The mixers are designed to be positioned under basin or bidet immediately below the hot water inlet. Mixers should be commissioned at installation to the application designated temperature.
22mm mixers designed to be positioned under basin, bidet or bath immediately below the hot water inlet. Mixers should be commissioned at installation to the application designated temperature. *For high pressure bath filler
- Automatic shut off if cold supply fails
- Precise temperature control
-
Chrome
(AA)
Material: |
Chrome Plated Metal |
Weight: |
0.50Kg |
Standards:
TMV3 meets the requirements of the NHS Model Engineering Specification-D08 Valves. TMV 2 meets BS EN 1111 & BS EN 1287.