Jasper Morrison Bowl Rim Flush Fully Concealed Urinal

E6215(01) Jasper Morrison bowl urinal rim flushing, back inlet and concealed waste

Rim flushing urinal flushing from the mains supply, not suitable for flushing from a cistern


  • Fully concealed
  • Easy clean design
  • Flushed from mains water
  • No Auto Cisterns
  • Sensor flushing

  • White
    (01)
Material: Vitreous China
Weight: 17.00Kg

Standards: Vitreous china to BS 3402

Data Sheet Spares Where to Buy

Urinal

E6215(01) Jasper Morrison bowl urinal rim flushing, back inlet and concealed waste

Trap

E6227(67) Urinal syphon connector with 75mm water seal, and 40mm outlet

Urinal Connecting Set

K7106(67) Urinal Connecting set

Urinal Flush Actuator

A7001(AA) Sensorflow 21 urinal flush, high pressure valve, panel mounted, mains

Type Unknown

R0163(67) Prosys urinal frame for use with Sensorflow (specfic urinals only)

Urinal Division

S6120(01) Urinal division Vitreous China with hanger and screw

Special notes

Please click the [Specify this] button and then configure the bowl by adding one of the Sensorflow 21 electronic urinal flushing products. Mains versions can power up to 5 link flushing valves or the battery versions can be independent. Please refer to Sensorflow 21 compact urinal flushing device pages. Then add as many urinals assembly types: mains/linked/battery, as needed in the room schedule. Not suitable for flushing from a cistern. Please note minimum working pressure required is 1 bar dynamic. A WRAS approved DC interrupter should be fitted to satisfy the UK regulations.

icon_cookie Arrow Group 5 Favourites i_Tick i_Tick Instagram