Concealed Urinal Cistern

S0851(67) Urinal cistern, non auto, for use with BI urinals and low pressure Sensor operation, 8 litre capacity

Plastic concealed water storage supply cistern with 8 litre capacity. The urinal cistern is for use with back inlet cisterns and our Sensorflow operated, low pressure system.

For duct fixation
8 litre capacity
For use on low pressure systems
For use with Sensorflow urinal sensor

Finishes

Neutral / No Finish
(67)

Material:	Plastic
Weight:	1.83Kg
Capacity:	8.0 Litres

Data Sheet Spares Where to Buy

Cistern

S0851(67) Urinal cistern, non auto, for use with BI urinals and low pressure Sensor operation, 8 litre capacity

Urinal Flush Actuator

A7058(AA) Sensorflow 21 urinal flush, Low Pressure Valve, panel mounted, mains

Urinal Flush Actuator

A7059(AA) Sensorflow 21 urinal flush, low pressure valve, panel mounted, link

Sectors & Solutions

Hotels

Offices

Sports and Leisure

Special notes

This urinal storage supply tank is designed to be used in conjunction with our Sensorflow urinal sensor flushing devices. Before connection, flush water through the pipework to remove all debris etc, which could damage valve mechanism. Then ensure water supplies have been isolated. No sealing compound, flux or solvent to be used in contact with plastic or rubber surfaces to avoid damage, rubber washers will provide adequate seal. PTFE tape may be used on threads. Do not over tighten fasteners. Hand turn + 1/4 turn is recommended and should provide an adequate seal. No chemical block / additive to be used in this storage supply tank. Read instructions thoroughly.

Material:	Chrome Plated Brass
Weight:	1.51 Kg

Material:	Chrome Plated Brass
Weight:	1.00 Kg

Concealed Urinal Cistern

Cistern

Urinal Flush Panel Mounted Mains

Urinal Flush Panel Mounted Link

Sectors & Solutions

Special notes

Resources to download